|
 Custom
InfosealPS
Custom InfoSealPS products offer an impressive
range of document features. We pride ourselves on designing
products to meet your specific application needs. Features
include numerous sizes, papers, ink colors, patches, die cuts,
and value-added features such as ID cards, labels, and decals.
Custom products are available in quantities exceeding 25,000
documents per order and multi-lot combination orders also
qualify. That means you have a variety of ways to economize
while maximizing the utility of the document.
Overview
of Value-Added I.D. Cards & Decals
Non-laminated
Perf-Out InfoCards
Laminated
Perf-Out InfoCards
EZ
Release Integrated Cards
Tipped-On
Cards (Laser Compatible) – Debossed InfoCards
Tipped-On
Cards & Decals (Impact Compatible)
Integrated
Labels
Introduction
When designing an InfoSealPS form with an I.D. Cards, one
should consider the type of card and the printer. The available
card types include:
- Non-laminated Perf-Out InfoCards
- Laminated Perf-Out InfoCards
- EZ Release InfoCards
- Tipped-On Cards (Laser Compatible) – Debossed InfoCards
- Tipped-On Cards & Decals (Impact Compatible)
Card Applications & Markets
The following is a list of possible I.D. Card applications
and Markets:
- ID/Membership Cards:
- Insurance
- Healthcare Maintenance Organizations (HMO)
- Pharmacies
- Clubs & Associations
- Fund Raising Organizations
- Schools & Universities
- State Governments (voter registration)
- Retail Stores/Warehouse Clubs
- Banks and Credit Unions
- Temporary Credit Cards:
- Retail Stores (Furniture, Electronics, Department Stores,
etc.)
- Discount/Frequent Buyer Cards:
- Retail Stores (Book, Clothing, Sporting Goods, etc.)
- Fast Food Restaurants (Coffee Shops, etc.)
- Travel Industry (Airlines, Hotels, Rental Cars)
Non-Laminated Perf-Out InfoCards
Description
Non-laminated, integrated cards are die-cut out of
the base ply of the InfoSealPS form. They can be used in either
a one or two part self-mailer. They are easily torn out of
the form by the recipient.
Standard Weight Specifications
The standard weight for the Base paper is 28# Laser
Alternates: 24# laser up to 110# index
Printer and Folder/Sealer specifications should be considered
when selecting a paper weight.
Form Lengths
Form Lengths are the same as our standard press lengths. Those
lengths are:
- 7"
- 9-1/3"
- 17"
- 7-1/3"
- 11"
- 8-1/2"
- 14"
Form Widths
Form Widths are standard at 8-1/2" for cut sheet and
9-1/2" with ½" control punched margins for
continuous.
Card Sizes
Standard Card Size = 3-3/8" x 2-1/8"
Consult Manufacturing for alternative sizes
Card thickness varies depending on paper weight and laminate
thickness
Card Placement
Card perforations may be no closer that 5/16" from the
edge of the form, perforation, line hole or fold. On continuous
forms that are machine burst, the card perforation should
be no closer that ¾" from the leading or trailing
edge of the document. The minimum laminate overlap is ¼".
The maximum number of cards on an InfoSealPS document is 2
cards placed side-by-side.
Card Perforations
A 5/25 perforation is recommended on all perf-out InfoCards
with laminate incorporated into InfoSeal. A 4/25 perforation
may be used as an alternate, but may cause feeding issues.
Folder/Sealer Acceptance
Non-laminated, integrated cards can be used in all InfoSealPS
folder/sealer equipment.
Laminated Perf-Out InfoCards
Description
Laminated, integrated cards are die-cut out of the base ply
of the InfoSealPS form. They can be used in one part self-mailer.
They are easily torn out of the form by the recipient.
Standard Weight Specifications
The standard weight for the Base paper is 28# Laser
Alternates: 28# laser up to 100# tag
Printer and Folder/Sealer specifications should be considered
when selecting a paper weight.
Form Lengths
Form Lengths are the same as our standard press lengths. Those
lengths are:
- 7"
- 9-1/3"
- 17"
- 7-1/3"
- 11"
- 8-1/2"
- 14"
Form Widths
Form Widths are standard at 8-1/2" for cut sheet
and 9-1/2" with ½" control punched margins
for continuous.
Card Sizes
Standard Card Size = 3-3/8" x 2-1/8"
Consult Manufacturing for alternative sizes
Card thickness varies depending on paper weight and laminate
thickness
Card Placement
Card perforations may be no closer that 5/16" from the
edge of the form, perforation, line hole or fold. On continuous
forms that are machine burst, the card perforation should
be no closer that ¾" from the leading or trailing
edge of the document. The minimum laminate overlap is ¼".
The maximum number of cards on an InfoSealPS document is 2
cards placed side-by-side.
Card Perforations
A 5/25 perforation is recommended on all perf-out InfoCards
with laminate incorporated into InfoSealPS. A 4/25 perforation
may be used as an alternate, but may cause feeding issues.
EZ Release Integrated Cards
Description
Laminated, integrated cards are kiss-cut out of the base ply
of the InfoSealPS form. They can be used in one part self-mailer.
They are easily peeled off of the form by the recipient.
Standard Weight Specifications
The standard weight for the Base paper is 28# Laser
Alternates: 28# laser up to 100# tag
Printer and Folder/Sealer specifications should be considered
when selecting a paper weight.
Form Lengths
Form Lengths are the same as our standard press lengths. Those
lengths are:
- 7"
- 9-1/3"
- 17"
- 7-1/3"
- 11"
- 8-1/2"
- 14"
Form Widths
Form Widths are standard at 8-1/2" for cut sheet
and 9-1/2" with ½" control punched margins
for continuous.
Card Sizes
Standard Card Size = 3-3/8" x 2-1/8"
Consult Manufacturing for alternative sizes
Card thickness varies depending on paper weight and laminate
thickness.
Card Placement
Card kiss-cuts may be no closer that 3/8" from
the edge of the form, perforation, line hole or fold. On continuous
forms that are machine burst, the card perforation should
be no closer that ¾" from the leading or trailing
edge of the document. The standard laminate overlap on back
is 5/16". The maximum number of cards on an InfoSealPS
document is 2 cards placed side-by-side.
Laminates for Back of Card
The following card laminates are available for EZ Release
Integrated Cards incorporated into InfoSealPS on the back
of the card:
For more information check our Integrated
Cards section.
Integrated Labels
For more information check our Integrated
Labels section.
Tipped-On Cards (Laser Compatible) –
Debossed InfoCards
Description
InfoSealPS forms are embossed to create an impression for the
synthetic card to be affixed. Card easily peels off the form
by the recipient.
Standard Weight Specifications
The standard weight for the Base paper is 100# tag
Alternate: 7pt reply card
Printer and Folder/Sealer specifications should be considered
when selecting a paper weight.
Form Lengths
Form Lengths are the same as our standard press lengths. Those
lengths are:
Form Widths
Form Widths are standard at 8-1/2" for cut sheet
and 9-1/2" with ½" control punched margins
for continuous.
Card Sizes
Standard Card Size = 3-3/8" x 2-1/8"
Card thickness is 7.5 mil and is laser and signature compatible.
Card Placement
The card may be no closer that ¾" from
the edge of the form, perforation, line hole or fold. The
card should be placed in the middle panel OR in the panel
that trails in the folder/sealer equipment. The trailing panel
is the panel opposite the three glue tabs (except on mid range
model 2612)
Card Affixing Information
- 1 card should be centered in debossed well (or patched
area). In some cases, registration marks are provided for
card placement on Debossed forms.
- Card is affixed with good registration on the form and
from form-to-form (target = ± 1/32"; acceptable
= ± 1/16")
- Card is firmly affixed to carrier and the adhesive dot
pattern is close to the edge of the card without glue ooze
(approximately 1/8" from edge of card).
Tipped-On Cards & Decals (Impact Compatible)
Description
InfoSealPS forms can carry an affixed card or decal for processing
on a continuous impact printer. Card or decal easily peels
off the form by the recipient.
Paper Weight Range
The paper weight range for tipped-on cards is:
Caution: The make and model printer must be taken into consideration
when considering a paper weight for a particular application.
Card/Decal Positioning
When designing an InfoSealPS form to accommodate a tipped-on
card or decal, it cannot be placed in leading panel into the
folder/sealer.
Available InfoSealPS Constructions
Tipped-on cards and decals may be used in forms of
11, 14, or 17 inch length.
Available either continuous or cut-sheet forms. Not available
in rolls.
Card Materials
Tipped-on cards can be made from the following materials:
- MP-90 (paper cards)
- Synthetic materials
- Plastic
Card Thickness
Tipped on card thickness varies from 7pt to 10pt.
|
