Custom Infoseal
Custom InfoSeal products offer an impressive range of document features. We pride ourselves on designing products to meet your specific application needs. Features include numerous sizes, papers, ink colors, patches, die cuts, and value-added features such as ID cards, labels, and decals. Custom products are available in quantities exceeding 25,000 documents per order and multi-lot combination orders also qualify. That means you have a variety of ways to economize while maximizing the utility of the document.

Overview of Envelope Patches

Introduction
When designing an InfoSeal form, there are four general specifications relating to envelope patches to consider. They are:

• Envelope Size
• Paper Weight
• Envelope Patch Adhesives
• Depths
  

Standard Envelope Sizes
The standard envelope depths for 11" depth forms are 3 3/7" or 4".
The standard envelope depth for 14" depth forms is 3-1/2".
The standard envelope depth for 17" depth forms is 4-1/4".
Exceptions/Alternatives: Refer to Product Development/Manufacturing.

Standard Paper Weight
In order to improve the appearance of the form and to provide an easier opening envelope, the standard paper weight for envelope patches is 20# RB.

Exceptions/Alternatives: Clients with non-impact printers may prefer to use either 20# MICR/OCR or 24# MICR/OCR to improve imaging.

Envelope Patch Adhesives
Refer to the previous for a full discussion of Envelope Patch Adhesives.

Folder/Sealer Considerations
Ideally, the patched envelope should be placed in the bottom panel (opposite of the three glue tabs) of a C-fold document. The opening of the reply envelope should be at the bottom of the form to improve processing through the folder/sealer.

Exception: The reply envelope patch can be positioned with the opening toward the top of the document. However, this position is not recommended on forms processed through the Mid Range Folder/Sealer (model 2612) do to the potential of the reply envelope opening catching on the window patch of the next form.

Envelope Patch Depths
The following is a table of InfoSeal (H-Line) patch depths.

Patch Depth	InfoSeal Form Depth
	8.5	11	14	17
1/3	X	X
2/5		X
½	X	X	X	X
3/5		X
2/3	X		X	X
¾	X	X	X	X
4/5	X	X	X	X
5/6	X	X	X	X
1	X	X	X	X
1 1/6	X	X	X	X
1 1/5		X	X	X
1 ¼ *	X	X	X
1 1/3	X	X	X	X
1 2/5		X	X	X
1 ½		X	X	X
1 3/5	X	X	X	X
1 2/3 *	X	X	X	X
1 ¾	X	X	X	X
1 4/5				X
1 5/6	X	X	X	X
2	X			X
2 1/6			X
2 1/5	X	X	X	X
2 ¼		X	X	X
2 1/3	X	X	X	X
2 2/5	X	X	X	X
2 ½ *	X	X	X	X
2 2/3	X	X	X	X
2 3/4	X	X	X
2 4/5	X	X	X	X
3	X	X	X	X
3 1/6 *				X
3 1/5 *	X	X	X	X
3 1/3 *	X	X	X	X
3 3/7		X
3 ½	X	X	X	X
3 3/5			X
3 2/3	X	X	X	X
3 ¾ *	X	X	X	X
3 4/5 *				X
4	X	X	X	X
4 1/6 *				X
4 1/5 *	X	X	X
4 ¼		X	X	X
4 1/3 *				X
4 2/5	X	X	X	X
4 ½		X	X
4 2/3	X	X	X	X
4 4/5	X	X	X	X
5 *	X	X	X	X
51/4 *		X	X	X
5 1/3 *	X	X	X	X
5 ½	X	X	X	X
5 3/5	X	X	X	X
5 5/6 *	X	X		X
6	X	X	X	X
6 ¼ *				X
6 2/5 *	X	X	X	X
6 3/5 *	X	X	X	X
6 2/3 *	X	X		X
7	X	X	X	X
7 1/6 *				X
7 1/5		X	X	X
7 1/3	X	X	X	X
7 ½ *		X	X
8		X	X	X
8 1/6 *		X		X
8 ¼ *		X	X
8 1/3 *				X
8 2/5 *		X	X	X
8 ½		X
8 ¾ *		X	X	X
8 4/5 *		X
9		X		X
9 1/6 *				X
9 1/3		X	X	X
9 3/5 *		X	X	X
9 4/5 *		X		X
10 *		X
10 ½ *		X
10 2/3 *		X	X
11		X	X
12			X

* Sizes cannot be printed.
Printed patches must also be an even segment of press cylinder size.